Kikusui 149-10A Operation Manual page 7

Operation
Maintenance and checking
Service
149-10A
• Check that the AC input voltage setting and the fuse
rating are satisfied and that there is no abnormality on
the surface of the power cord. Be sure to unplug the
power cord or stop applying power before checking.
• If any abnormality or failure is detected in the
products, stop using it immediately. Unplug the power
cord or disconnect the power cord from the
switchboard. Be careful not to allow the product to be
used before it is completely repaired.
• For output wiring or load cables, use connection
cables with larger current capacity.
• Do not disassemble or modify the product. If it must
be modified, contact Kikusui distributor/agent.
• To avoid electrical shock, be absolutely sure to
unplug the power cord or stop applying power before
performing maintenance or checking.
• To maintain performance and safe operation of the
p r o d u c t , i t i s r e c o m m e n d e d t h a t p e r i o d i c
maintenance, checking, cleaning, and calibration be
performed.
• Internal service is to be done by Kikusui service
engineers. If the product must be adjusted or
repaired, contact Kikusui distributor/agent.
5