Kikusui 149-10A Operation Manual page 6

Fuse
Cover
L N G
Installation
Relocation
4
• With products with a fuse holder on the exterior
surface, the fuse can be replaced with a new one.
When replacing a fuse, use the one which has
appropriate shape, ratings, and specifications.
• There are parts inside the product which may cause
physical hazards. Do not remove the external cover.
• To avoid electrical shock, connect the protective
conductor terminal to electrical ground (safety
ground).
• When installing products with casters, be sure to lock
the casters.
• Turn off the power switch and then disconnect all
cables when relocating the product.
• Use two or more persons when relocating the product
which weights more than 18 kg. The weight of the
products can be found on the rear panel of the
product and/or in this operation manual.
• Use extra precautions such as using more people
when relocating into or out of present locations
including inclines or steps. Also handle carefully
when relocating tall products as they can fall over
easily.
• Be sure the operation manual be included when the
product is relocated.
149-10A