Set Up Vpn Connection - TP-Link Archer C3200 User Manual

Default Gateway: is the IP address of the gateway device to which the
data packets will be sent. This IP address must be on the same subnet
with the router's IP which sends out the data. In the example, the data
packets will be sent to the LAN port of Router 2 and then to the Server,
so the default gateway should be 192.168.0.2.
Interface: is determined by the port (WAN/LAN) that sends out the
data packets. In the example, the data is sent to the gateway through
the LAN port, so LAN should be selected.
Description: (Optional) Enter a description for this static routing entry.
4. Click OK to save the settings.
5. Check the System Routing Table below. If you can find the entry
you set in the System Routing Table, the static routing is set
successfully.
Completed! Open a web browser on your PC. Enter the company server's IP
address to visit the company network.

13.6 Set up VPN Connection

VPN (Virtual Private Network) is a private network established via the public network, generally
via the Internet. However, the private network is a logical network without any physical network
lines, so it is called Virtual Private Network.
With the wide application of the Internet, more and more data are needed to be shared through
the Internet. Connecting the local network to the Internet directly, though can allow the data
exchange, will cause the private data to be exposed to all the users on the Internet.
Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
- 80 -