Chapter 2. Connect Your Router; System Requirements; Installation Environment Requirements; Connect Your Router - TP-Link Archer C3200 User Manual

Chapter 2. Connect Your Router

2.1

System Requirements

¾ Broadband Internet Access Service (DSL/Cable/Ethernet)
¾ One DSL/Cable Modem that has an RJ45 connector (which is not necessary if the router is
connected directly to the Ethernet)
¾ PCs with a working Ethernet Adapter and an Ethernet cable with RJ45 connectors
¾ TCP/IP protocol on each PC
¾ Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari
2.2

Installation Environment Requirements

¾ Place the router in a well-ventilated place far from any heater or heating vent
¾ Avoid direct irradiation of any strong light (such as sunlight)
¾ Keep at least 2 inches (5 cm) of clear space around the router
¾ Operating Temperature: 0 ~40
¾ Operating Humidity: 10%~90%RH, Non-condensing
2.3

Connect Your Router

1. Connect your router as shown in the figure below. The electrical outlet shall be installed near
the device and shall be easily accessible.
Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
(32 ~104 )
- 6 -