Create Static Routes - TP-Link Archer C3200 User Manual

4. Name the group.
5. Check the boxes of LAN1 and LAN3 in Available LAN. Here Wi-Fi 2.4G
network and Wi-Fi 5G network are viewed as a LAN interface respectively.
6. Click Enable Group Isolation to isolate working devices and disallow other
devices from communicating with them.
7. Click OK to save the settings.
Now your working devices connected to LAN1 and LAN3 are in an isolated group!
Completed!
VLAN function is enabled by default. You cannot disable it when IPTV is enabled.
In addition:

13.5 Create Static Routes

Static routing is a form of routing that is configured manually by a network administrator or a user
by adding entries into a routing table. The manually-configured routing information guides the
router in forwarding data packets to the specific destination.
I want to: Visit multiple networks and multiple servers at the same time.
For example, in a small office, my PC can surf the Internet, but I also
want to visit my company's network. Now I have a switch and another
router. I connect the devices as shown in the following figure so that
the physical connection between my PC and my company's server is
Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
- 78 -