14.5 Local Management
You can control the local devices' authority to manage the router via Local Management feature.
By default all local connected devices are allowed to manage the router. You can also allow only
one device to manage the router.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router. Locate the Local
Management section
2. Keep the Port as the default setting. Enter the IP address or MAC address of the local device
to manage the router.
3. Click Save to make the settings effective. Now only the device (192.168.1.100) can manage
the router.
Note: If you want that all local devices can manage the router, just leave the IP/MAC Address
field blank.
14.6 Remote Management
By default, the remote devices are not allowed to manage the router from the Internet. Follow the
steps below to allow remote devices to manage the router.
1. Visit http://tplinkwifi.net, and log in with the password you set for the router. Locate the
Remote Management section.
2. Tick the checkbox to enable the remote management.
3. Keep the Port as the default setting. Leave the IP/MAC Address field blank.
Archer C3200
AC3200 Wireless Tri-Band Gigabit Router
- 88 -