Schedule Your Wireless Function - TP-Link Archer C3200 User Manual

2. The WPS LED flashes for two minutes during the WPS process.
3. When the WPS LED is on, the client device has successfully connected to the router.
Refer back to your client device or its documentation for further instructions.
Note:
1. The WPS LED on the router will light green for five minutes if the device has been successfully
added to the network.
2. The WPS function cannot be configured if the wireless function of the router is disabled.
Please make sure the wireless function is enabled before configuring the WPS.

13.2.3 Schedule Your Wireless Function

I want to: Automatically turn off my wireless network (both 2.4GHz and 5GHz) at
times when I do not need the wireless connection.
For example, I want to turn it off on the weekdays when I leave home
for work. My work time is from 8:00am to 5:00pm from Monday to
Friday.
1. Visit http://tplinkwifi.net, and log in with the password you set for
How can I
the router.
do that?
2. Go to Advanced > Wireless > Wireless Schedule page.
3. Select the 2.4GHz wireless network to configure. Toggle on the
button to enable the Wireless Schedule feature.
4. Set the time. Drag the mouse to cover the time area and click Save
to make the settings effective. The selected time will be in green.
Archer C3200 AC3200 Wireless Tri-Band Gigabit Router
- 73 -