TP-Link Archer VR1600V- VDSL Manual

Setting Up

Please note: There are multiple versions of this modem, and these are the instructions for one of the versions.

1. Connect your nbn™ equipment and modem using the setup guide provided for your technology type. If you have not completed this, please refer back to the first set up guide.
2. Ensure the modem is powered on. Using a pin, reset the modem by pressing and holding the reset button on the modem until all the lights go off.
   
3. Using your own device (computer, laptop, tablet or smartphone), connect to the modem using one of the two options shown below: Ethernet cable directly to the Ethernet port or WiFi.
   Ethernet
   Connect the Ethernet cable (this is usually yellow, blue, grey or white) as shown below from the Ethernet port (LAN port) on the modem to the Ethernet port on your computer or laptop.
   
   WiFi
   Using the wireless security card from your modem, connect to the wireless (WiFi) network using the security code shown.
   
4. Open a web browser e.g. Google Chrome, Firefox, Internet Explorer. Enter the following into the URL address bar: 192.168.1.1
   
   You may see a login page and if the details are not already prefilled, use the below default settings:
   Default username: admin
   Default password: admin
   
5. Click Advanced → choose Network and Select: DSL
6. Select PPPoE and put in Flip Username and password sent to you in the Welcome Email. Ignore other options and click Save.
   
7. You can adjust the Wi-Fi as you wish by click Wireless → click Wireless Setting → click save

Congratulations- Your BYO modem set up should now be complete!
Please note you may need to wait a few minutes for the settings to apply and/or may also need to reboot/powercycle your modem (turn off and on again) if it does not occur automatically.
You can test the connection by visiting a website on your connected device. If it works, your Flip nbn™ internet is up and running! If you have issues connecting, please contact our support team for further troubleshooting.

How to Contact Our Support Team:

1. Give us a call on1300354788 during our business hours:
   Monday- Friday: 9 am-8pm
   Saturday and Sunday: 9 am-5 pm
2. Email: enquiries@flipconnect.com.au
   Please include in your email your:
   • Account Number
   • Step number and description of issue/fault
   • Any relevant pictures etc. which may assist our team in resolving this for you
   • Preferred contact method and/or contact time (we'll do our best to reach you at the requested time).