Method 2 Through Dmz - TP-Link Archer C3200 User Manual

Website in Local Network to the Internet -> Method 1 Through Virtual
Server ->Mode 2 Manual Configuration".
5. Click OK.

Method 2 Through DMZ

Tip: If you are not sure which specific port to open, you can use DMZ. When
DMZ is enabled, the DMZ host is exposed to the Internet, which may bring some
potential safety hazard. If DMZ is not in use, please disable it in time.
1. Verify the PC's IP address. For example, 192.168.0.100.
Tip: It is recommended to assign a static IP to your PC.
2. Visit http://tplinkwifi.net, and log in with the username and password you set
for the router.
3. Click
page.
4. Select the
5. Enter the PC's IP address 192.168.0.100 into the
field.
6. Click
Completed!
1. If Method 1 Virtual Server is used, the Internet users can enter
IP: External Port
personal website.
Archer C3200
Advanced ->NAT Forwarding
Enable DMZ checkbox.
Save to complete the configuration.
(in this example: http:// 218.18.232.154: 8000) to visit your
- 60 -
AC3200 Wireless Tri-Band Gigabit Router
-> DMZ to open the DMZ configuration
DMZ Host IP Address
http:// WAN