JVC UX-HB4 Service Manual page 11

3.1.3 Removing the CD mechanism assembly
(See Fig.9, 10)
• Prior to performing the following procedure, remove the front
panel assembly and the main board.
(1) Release the four bands setting the wire.
(2) Disconnect the wire from connector
mechanism board respectively.
(3) Remove the three screws H attaching the CD mechanism
assembly.
(4) Release the joint d to remove the CD mechanism assem-
bly from the front panel assembly.
CN607 on the CD
Front panel assembly
H
Band
H
Band
H
Fig.9
Joint d
Joint d
Front panel assembly
Fig.10
CD mechanism assembly
Band
CD mechanism board
CN607
CD mechanism assembly
(No.MB330)1-11