JVC UX-HB4 Service Manual page 10

3.1.2 Removing the main board
(See Fig.7, 8)
• Prior to performing the following procedure, remove the front
panel assembly.
(1) Disconnect the wire from all connectors on the main board.
(2) Disconnect the wire from the two connectors on the cas-
sette mechanism assembly.
(3) Release the two bands attaching the wire to the main
board.
(4) Remove the two screws G from the front panel assembly.
Release the joint b.
1-10 (No.MB330)
Front panel assembly
CD mechanism assembly
Main board
CN203
CN303
CN302
CN301
Fig.7
CD mechanism assembly
Joint b
Main board
Fig.8
CD mechanism assembly
CN103
CN401
CN403
G
Front panel assembly
Band