Function And Control; Remote Control Introduction; Buttons On The Remote Control - Sharp AY-X36RU Service Manual

Split type air conditioners

Hide thumbs Also See for AY-X36RU:

Installation manual (21 pages)

Operation manual (48 pages)

Table of Contents

AY-X36RU

AE-X36RU

[1] Remote Control Introduction

Buttons on the Remote Control

Note:

● Once popower is connected, the air conditioner will give out a sound. Operation indictor " " is ON (red indicator). After that, the

air conditioner can be operated by using the remote controller.

● Under ON status, pressing the button on the remote controller, the signal icon "

once and the air conditioner will give out a "de" sound, which means the signal has been sent to the air conditioner.

● Under OFF status, set temperature and clock icon will be displayed on the display of remote controller (If timer on, timer off and

light functions are set, the corresponding icons will be displayed on the display of remote controller at the same time); Under ON

status, the display will show the corresponding set function icons.

1. ON/OFF button

Press this button can turn on or turn off the air conditioner. After turning on the air conditioner, operation indicator " "on indoor

unit's display is ON (green indicator), and indoor unit will give out a sound.

2. MODE button

Press this button to select your required operation mode.

● When selecting auto mode, air conditioner will operate automatically according to ex-factory setting. Set temperature can't be

adjusted and will not be displayed as well. Press "FAN" button can adjust fan speed. Press "SWING" button can adjust fan

blowing angle.

● After selecting cool mode, air conditioner will operate under cool mode. Cool indicator " "on indoor unit is ON. Press "▲" or "

▲" button to adjust set temperature. Press "FAN" button to adjust fan speed. Press "SWING" button to adjust fan blowing angle.

● When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry indicator " " on indoor unit is ON.

Under dry mode, fan speed can't be adjusted. Press "SWING" button to adjust fan blowing angle.

● When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating. All indicators are OFF. Press "FAN"

button to adjust fan speed. Press "SWING" button to adjust fan blowing angle.