Table of Contents
Advertisement
Appendix
Symbol mark
Approved stand-
ards
IEC60417
Alternating current
No. 5032
To indicate on the rating plate that the equipment is suitable for
alternating current only; to identify relevant terminals.
IEC60417
Direct current
No. 5031
To indicate on the rating plate that the equipment is suitable for
direct current only; to identify relevant terminals.
IEC60417
Class II equipment
No. 5172
To identify equipment meeting the safety requirements specified
for Class II equipment according to IEC 61140.
ISO 3864
General prohibition
To identify actions or operations that are prohibited.
ISO 3864
Contact prohibition
To indicate injury that could occur due to touching a specific part
of the equipment.
---
Never look into the projection lens while the projector is on.
---
To indicate that the marked item don't place anything on pro-
jector.
ISO3864
Caution, laser radiation
IEC60825-1
To indicate the equipment has a laser radiation part.
ISO 3864
Disassembly prohibition
To indicate a risk of injury, such as electric shock, if the equipment
is disassembled.
---
Never look into the lens while the LED for lighting is on.
IEC60417
Standby, partial standby
No. 5266
To indicate that part of the equipment is in the ready status.
ISO3864
Caution, movable parts
IEC60417
To indicate that you must keep away from movable parts ac-
No. 5057
cording to protection standards.
Meaning
126
Advertisement
Table of Contents
