Table of Contents
Advertisement
Troubleshooting
Moving images are not displayed
Check
(Only when projecting computer image sig-
nals)
Is the computer's image signal set to external
output and to output to the LCD monitor at
the same time?
"Not supported" is displayed
Check
(Only when projecting computer image sig-
nals)
Do the image signal's frequency and resolu-
tion correspond to the mode?
"No Signal" is displayed
Check
Are the cables connected correctly?
Is the correct image input port selected?
Is the connected device turned on?
(Only when projecting computer image sig-
nals)
Are the image signals being output to the
projector?
Images are fuzzy or out of focus
Check
Has the focus been adjusted?
Is the projector at the correct distance?
Depending on the computer's specifications, moving images
may not be displayed when the computer is set to external out-
put and to the LCD monitor output at the same time.
Change it so that the image signal is set to external output only.
For the computer's specifications, see the documentation sup-
plied with the computer.
Check the image signal being input in Resolution from the Con-
figuration menu, and check that it corresponds to the projector's
resolution.
Info - Projector Info
s
p.118
s
Check that all the cables required for projection are securely
connected.
p.19
s
Change the image with the source buttons on the remote con-
trol, or the
button on the control panel.
Turn on the device.
Change it so that the image signal is set to external output, and
not just the computer's LCD monitor. For some models, when
the image signals are output externally, they no longer appear
on the LCD monitor.
For the computer's specifications, see the documentation sup-
plied with the computer.
If the connection is made while the power of the projector or the
computer is already turned on, the Fn key (Function key) that
changes the computer's image signal to external output may not
work. Turn the power for the computer and the projector off and
then back on again.
Adjust the focus.
p.29
s
Check the recommended projection range.
96
Remedy
Remedy
p.90
Remedy
p.26
s
Remedy
p.16
s
Advertisement
Table of Contents
