Table of Contents
Advertisement
Configuration Menu
Others menu
Function
AMX Device Dis-
On, Off
covery
Control4 SDDP
On, Off
Reset menu
Function
Reset network settings.
Info menu
Function
Projector Info
Version
*
The cumulative use time is displayed as "0H" for the first 10 hours. 10 hours and above is displayed as "10H",
"11H", and so on.
Menu/Settings
You can reset all adjustment values for Network to their default settings.
Menu/Settings
Lamp Hours
Source
Input Signal
Resolution
Scan Mode
Refresh Rate
3D Format
Sync Info
Color Depth
Color Format
Status
Serial Number
Event ID
Main
Video2
When you want to allow the projector to be de-
tected by AMX Device Discovery, set this to On.
Set this to Off if you are not connected to an en-
vironment controlled by a controller from AMX
or AMX Device Discovery.
When you want to allow the projector to be de-
tected by Control4 SDDP, set this to On. Set this
to Off if you are not connected to an environ-
ment controlled by a controller from Control4 or
Control4 SDDP.
Explanation
Explanation
Displays the cumulative lamp operating time
Displays the current input source.
Displays the input signal setting of the current input source.
Displays the resolution.
Displays the scan mode.
Displays the refresh rate.
Displays the 3D format of the signal input during 3D projec-
tion (Frame Packing, Side by Side, or Top and Bottom).
Displays the image signal information.
This information may be needed if service is required.
Displays the color depth and color difference.
Displays information on the color space and dynamic range.
This is information about errors that have occurred on the
projector.
This information may be needed if service is required.
Displays the projector's serial number.
The application error log appears.
Displays the firmware version of the projector.
90
Explanation
*
.
p.103
s
Advertisement
Table of Contents
