Rear - Epson EH-TW9300W User Manual

Introduction

Rear

Name
a Security slot (
)
b Power inlet
c Remote receiver
d Opt.HDMI port
e HDMI1 port
f HDMI2 port
g USB port
h Service port
i LAN port
j PC port
k RS-232C port
l Trigger Out port
The security slot compatible with the MicroSaver security system manufac-
tured by Kensington. For more details, visit the homepage of Kensington at
http://www.kensington.com/.
Connect the power cord.
Receives signals from the remote control.
Connects the power supply port for the optical HDMI cable.
Connects HDMI compatible video equipment and computers.
The HDMI1 port supports HDCP 2.2.
Connects the optional Wireless LAN unit. It is also used when updating the
firmware. p.21
s
Service port. This is not normally used.
Connects a LAN cable to connect to a network.
Connects to the RGB output port on a computer.
When controlling the projector, connect the projector to a computer with an
RS-232C cable. This port is for control use and should not normally be used.
Connects with external devices such as motorized screens.
12
Function
p.25
s
p.23
s
s
p.19
s
p.21
p.19
s
p.20
s