Table of Contents
Advertisement
Configuration Menu
Function
Lock Setting
Lens Lock
Child Lock
Control Panel Lock
Fine/Fast, 3D Display, 2D-to-3D Conversion, Bright-
User Button
ness Control, Info, Display the QR Code
Menu/Settings
On, Off
On, Off
Full Lock, Partial Lock, Off Full Lock: Disables all of the projec-
82
Explanation
When set to On, the focus, zoom, and
lens shift settings are locked at their
current settings.
If you press the
button when
Lens Lock is set to On,
played on the screen.
This locks the
button on the pro-
jector's control panel to prevent chil-
dren from turning on the projector by
accident. You can turn on the power
when locked by holding down the
button for approximately three
seconds. You can still turn off the de-
vice using the
button, or perform
operations with the remote control as
usual.
If changed, this setting is enabled af-
ter you power off the projector and
the cool-down process is complete.
Note that even if Child Lock is set to
On, the projector still turns on when
the power cord is connected if Direct
Power On is set to On.
tor's buttons.
Partial Lock: Disables all of the pro-
jector's buttons except for the
button.
is displayed on the screen if but-
tons are pressed while the projector
is locked. To unlock, press and hold
the
button on the control panel
for at least 7 seconds.
If changed, this setting is enabled
once you close the Configuration
menu.
Select a Configuration menu item to
assign to the
button on the re-
mote control. By pressing the
button, the assigned menu item se-
lection/adjustment screen is dis-
played, allowing you to make one-
touch settings/adjustments.
is dis-
Advertisement
Table of Contents
