Replacing The Serial Connector Module - Lenovo ThinkCentre M910z User Manual And Hardware Maintenance Manual

Replacing the serial connector module

Note
Attention
1
Remove the slide cover. For details, see
2
Remove the storage drive. For details, see
3
Remove the optical drive. For details, see
4
Remove the computer cover and side I/O bezel. For details, see
I/O bezel.
5
Remove the system board shield and side I/O bracket. For details, see
shield and side I/O bracket.
6
Replace the serial connector module.
1
7
Reinstall the removed parts and slide cover. For details, see
Replacing FRUs
The serial connector module is available only on some models.
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Removing the slide cover.
Replacing the 2.5-inch storage drive.
Replacing the optical drive.
2
Completing the parts replacement.
Replacing the computer cover and side
Replacing the system board
57