Replacing The Ultraflex Ii Stand - Lenovo ThinkCentre M910z User Manual And Hardware Maintenance Manual

Replacing the UltraFlex II Stand

Note
1
Remove any media from the drives and turn off all connected devices and the computer.
2
Disconnect all power cords from electrical outlets and disconnect all cables that are connected to
the computer.
3
Place a soft, clean towel or cloth on the desk or surface. Hold the sides of your computer and gently
lay it down so that the screen is against the surface and the computer cover is facing up.
4
Replace the UltraFlex II Stand.
1
Replacing CRUs
The UltraFlex II Stand is available only on some models.
2
25