Replacing the thermal sensor
Attention
1
Remove the slide cover. For details, see
2
Remove the storage drive. For details, see
3
Remove the optical drive. For details, see
4
Remove the computer cover and side I/O bezel. For details, see
I/O bezel.
5
Remove the system board shield and side I/O bracket. For details, see
shield and side I/O bracket.
6
Remove the VESA mount bracket. For details, see
switch.
7
Disconnect the thermal sensor cable from the system board. For details, see
8
Replace the thermal sensor.
1
9
Connect the thermal sensor cable to the system board. For details, see
10
Reinstall the removed parts and slide cover. For details, see
Replacing FRUs
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Removing the slide cover.
Replacing the 2.5-inch storage drive.
Replacing the optical drive.
Replacing the VESA mount bracket and cover presence
2
Completing the parts replacement.
Replacing the computer cover and side
Replacing the system board
System board.
System board.
61