Figure 57. Installing the Wi-Fi card
Figure 58. Connecting the Wi-Fi antenna cables
Figure 59. Installing the Wi-Fi card shield
6. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 55.
Replacing the serial connector module
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer stand. See "Replacing the computer stand" on page 16.
2. Remove the computer cover. See "Removing the computer cover" on page 18.
3. Remove the side I/O bezel. See "Replacing the side I/O bezel" on page 25.
4. Remove the system board shield. See "Replacing the system board shield" on page 26.
5. Replace the serial connector module.
.
Chapter 4
Replacing hardware
39