Table of Contents
Advertisement
Figure 54. Installing the Wi-Fi card
Figure 55. Connecting the Wi-Fi antenna cables
Figure 56. Installing the Wi-Fi card shield
6. Reinstall the removed parts. To complete the replacement, see "Completing the parts replacement" on
page 57.
Replacing the serial connector module
Attention: Do not open your computer or attempt any repairs before reading the Important Product
Information Guide.
1. Remove the computer stand. See "Replacing the computer stand" on page 16.
2. Remove the computer cover. See "Removing the computer cover" on page 17.
3. Remove the side I/O bezel. See "Replacing the side I/O bezel" on page 23.
4. Remove the system board shield. See "Replacing the system board shield" on page 24.
5. Replace the serial connector module.
38
M828z User Guide and Hardware Maintenance Manual
Advertisement
Table of Contents
