Replacing the system board
Attention
1
Remove the slide cover. For details, see
2
Remove the storage drive. For details, see
3
Remove the optical drive. For details, see
4
Remove the computer cover and side I/O bezel. For details, see
I/O bezel.
5
Remove the system board shield and side I/O bracket. For details, see
shield and side I/O bracket.
6
Remove the VESA mount bracket. For details, see
switch.
7
Remove the heat sink. For details, see
8
Remove the microprocessor. For details, see
9
Remove the Wi-Fi card. For details, see
10
Remove the USB 3.0 Type-C connector board. For details, see
board.
11
Remove the card reader. For details, see
12
Remove the M.2 storage drive. For details, see
13
Remove the serial connector module. For details, see
14
Make a record of the cable routing and cable connections, and then disconnect all cables from the
system board. For details, see
Replacing FRUs
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Removing the slide cover.
Replacing the heat sink.
Replacing the Wi-Fi card.
System board.
Replacing the 2.5-inch storage drive.
Replacing the optical drive.
Replacing the VESA mount bracket and cover presence
Replacing the microprocessor.
Replacing the USB 3.0 Type-C connector
Replacing the card reader.
Replacing the M.2 storage drive.
Replacing the serial connector module.
Replacing the computer cover and side
Replacing the system board
65