Replacing the USB 3.0 Type-C connector board
Attention
1
Remove the slide cover. For details, see
2
Remove the storage drive. For details, see
3
Remove the optical drive. For details, see
4
Remove the computer cover and side I/O bezel. For details, see
I/O bezel.
5
Remove the system board shield and side I/O bracket. For details, see
shield and side I/O bracket.
6
Disconnect the USB 3.0 Type-C connector board cable from the system board. For details,
see
System board.
7
Replace the USB 3.0 Type-C connector board.
1
8
Connect the USB 3.0 Type-C connector board cable to the system board. For details, see
board.
9
Reinstall the removed parts and slide cover. For details, see
Replacing FRUs
Do not open your computer or attempt any repairs before reading the Important
Product Information Guide.
Removing the slide cover.
Replacing the 2.5-inch storage drive.
Replacing the optical drive.
2
Completing the parts replacement.
Replacing the computer cover and side
Replacing the system board
System
53