Fujitsu Lifebook P1510 User Manual page 41

There are two ways to swap batteries: cold-
swapping and hot-swapping.
swapping means swapping batteries when
the system has been powered down; hot-
swapping is performed when the system is
powered by AC power.
Cold-swapping batteries
To cold-swap batteries in your battery
compartment, follow these easy steps:
(Figure 4-1)
1. Have a charged battery ready to install.
2. Shut down your notebook and
disconnect the AC adapter.
3. Lift the display enough to pull the
display latch from the slot.
4. Press the battery release latches to
open the compartment.
5. Remove the battery from the
compartment.
6. Slide the new battery into the
compartment.
7. Close the compartment and the battery
release latches will click into place.
8. Plug in the AC adapter and turn the
power on.
Figure 4-1.Removing the Battery
User-Installable Features
Hot-swapping Batteries
Cold- To hot-swap batteries in your battery
compartment follow these easy steps:
(Figure 4-1)
1. Close any open files and put your
notebook into Standby mode.
2. Connect an AC adapter or Auto/Airline
power adapter to provide power to the
system.
3. Lift the display enough to pull the
display latch from the slot.
4. Press the battery release latches
inward to open the compartment.
5. Remove the battery from the
compartment.
6. Slide the new battery into the
compartment.
7. Close the compartment and the battery
release latches will click into place.
8. Press the Suspend/Resume button to
return your notebook to normal
operation
If the Lithium ion battery
connector is not fully seated,
you may not be able to use
your notebook or charge your
battery.
.
31