Port Replicator; Port Replicator Components - Fujitsu Lifebook P1510 User Manual

Port Replicator

Release Latch
Port Replicator
An optional Port Replicator is available from
Fujitsu to support your LifeBook P Series
notebook. The Port Replicator extends the
functionality of your notebook by providing
ports to connect USB devices, an external
monitor, external speaker, or a LAN device.
The Port Replicator connects to the bottom
of your notebook.
PORT REPLICATOR
COMPONENTS
Following is a description of the Port
Replicator components. (Figure 4-5)
DC Power Jack
The DC power jack allows you to plug in the
AC adapter to power your notebook and
charge the internal Lithium ion battery.
USB 2.0 Ports (Qty. 2)
Universal Serial Bus (USB) 2.0 ports allow
you to connect USB devices. USB 2.0 ports
are backward-compatible with USB 1.1
devices.
34
External Monitor Port
USB Ports
Figure 4-5. Port Replicator rear panel
External Monitor Port
The external monitor port allows you to
connect an external VGA or SVGA monitor.
Note that if a Port Replicator is attached,
you must use the external monitor port on
the Port Replicator, not the one on your
system.
LAN (RJ-45) Jack
The LAN jack allows you to connect a LAN
to the Port Replicator. Note that when the
system is attached to the Port Replicator,
the LAN Jack on the Port Replicator should
be used, not the one on the system.
Docking Port
The docking port connects the Port
Replicator to your LifeBook notebook.
Port Replicator Release Latch
Pull the Port Replicator Release latch away
from the Port Replicator to remove the Port
Replicator from your notebook.
Docking Port
DC Power Jack
LAN (RJ-45) Jack