Fujitsu Lifebook P1510 User Manual page 73

Problem
Shutdown and Startup Problems
The Suspend/ The Suspend/
Resume button Resume button is
does not work. disabled from the
Advanced submenu
of the Power menu
of the setup utility.
You did not hold the
button in long
enough.
There may be a
conflict with the
application software.
The system powers The boot sequence
up, settings of the setup
and displays power- utility are not
on information, but compatible with your
fails to load the configuration.
operating system.
You have a secured
system requiring a
password to load
your operating
system.
An error message is Power On Self Test
displayed on the (POST) has
screen during the detected a problem.
notebook boot
sequence.
Your system display The system may be
won't turn on when password-protected.
the system is turned
on or when the
system has
resumed.
Possible Cause
Enable the button from the setup utility.
Hold the button longer. This may need to be
a few seconds if your application is
preventing the CPU from checking for button
pushes.
Close all applications and try the button
again.
Set the operating source by pressing the
[F2] key while the Fujitsu logo is on screen,
entering the setup utility and adjusting the
source settings from the Boot menu.
Make sure you have the right password.
Enter the setup utility and verify the Security
settings and modify them as accordingly.
See the Power On Self Test (POST)
messages to determine the meaning and
severity of the problem. Not all messages
are errors; some are simply status
indicators.
Check the status indicator panel to verify
that the Security icon is blinking. If it is
blinking, enter your password.
Troubleshooting
Possible Solutions
63