Fujitsu Lifebook P1510 User Manual page 75

Problem
Your system display The system may be
won't turn on when password-protected.
the system is turned
on or when the
system has
resumed.
The display goes The notebook has
blank by itself after gone into Video
you have been Timeout, Standby
using it. Mode, or Hibernate
Mode because you
have not used it for a
period of time.
The power
management
timeouts may be set
for very short
intervals and you
failed to notice the
display come on
and go off again.
The display does A foreign object,
not close. such as a paper clip,
is stuck between the
display and the
keyboard.
The display has If the spots are very
bright or dark spots. tiny and few in
number, this is
normal for a large
LCD display.
If the spots are
numerous or large
enough to interfere
with your operation
needs.
Possible Cause
Check the status indicator panel to verify
that the Security icon is blinking. If it is
blinking, enter your password.
Press a button on the keyboard, or move the
mouse to restore operation. If that fails, push
the Suspend/Resume button. Check your
power management settings, or close your
applications and go to the Power Savings
menu of the setup utility to adjust the
timeout values to better suit your operation
needs.
Press any button on the keyboard, or move
the mouse to restore operation. If that fails,
push the Suspend/Resume button. (The
display may be shut off by Standby Mode,
Auto Suspend or Video Timeout)
Remove all foreign objects from the
keyboard.
This is normal; do nothing.
The display needs technical diagnosis;
contact your support representative.
Troubleshooting
Possible Solutions
65