Wiring
3.1
Wiring and block diagram
This section includes the block diagram of the AQ 2xI ST with the terminal assignments.
You can find information on wiring the BaseUnit in the ET 200SP distributed I/O system
(http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Note
The load group of the module must begin with a light-colored BaseUnit. Keep this in mind
also during the configuration.
Analog output module AQ 2xI ST (6ES7135-6GB00-0BA1)
Manual, 12/2015, A5E36104864-AA
3
11