HIKVISION DS-7104HQHI-K1 User Manual page 134
Ds-7100hqhi-k1 series;
ds-7200hqhi-k1 series;
ds-7200hqhi-k2 series;
ds-7200hqhi-k/p series;
ds-7200huhi-k1 series;
ds-7200huhi-k2 series;
ds-7200huhi-k/p series;
ds-7300hqhi-k4 series
Hide thumbs
Also See for DS-7104HQHI-K1:
- Quick start manual (17 pages) ,
- User manual (220 pages) ,
- User manual (184 pages)
Table of Contents
Advertisement
Digital Video Recorder User Manual
The alarm signal will be transmitted automatically at detection mode when remote alarm host is
configured. Please refer to Chapter 12.2.6 Configuring More Settings for details of alarm host
configuration.
Send Email
Send an email with alarm information to a user or users when an alarm is detected.
Please refer to Chapter 12.2.8 Configuring Email for details of Email configuration.
Trigger Alarm Output
Trigger an alarm output when an alarm is triggered.
Step 1 Go to Menu > Configuration > Alarm > Alarm Output.
Step 2 Select an alarm output and set alarm name and dwell time.
Figure 8-19 Alarm Output Settings Interface
If Manually Clear is selected in the drop-down list of Dwell Time, you can clear it only by going to
Menu > Manual > Alarm.
Step 3 Click
button to set the arming schedule of alarm output.
Choose one day of a week and up to 8 time periods can be set within each day.
Time periods shall not be repeated or overlapped.
133
- Quick Links:
- Front Panel
Hide quick links:
Advertisement
Table of Contents
