Table of Contents
Advertisement
6. Normal operation
~~
CanadianSolar
6.7 Sub-menu "Advanced Settings"- Technicians only
NOTES
This function is for authorized technicians only. Improper access and
operation may result in abnormal results and damage to the inverter.
Password required- restricted access- authorized technicians only.
Unauthorized access will void the warranty.
Select Advanced Settings from the main menu (see Figure 6.24) to access the following
options. Enter password as described in Section 6.6.
Advanced Set.
2015-02-23 19 35
Select Standard
Grid ON/OFF
Power Control
Clear Energy
Restore Settings
-
Figure 6.24 Advanced settings
6. 7.1 Select Standard
NOTES
This is for service technicians only. The inverter is customized according to
the local standard before shipping. There should be no requirement to set
the standard.
The "User-Def" function can be only used by the service engineer, and
changing the protection level must be approved by the local grid company.
Select grid standard (see Figure 6.25).
.46.
~~
CanadianSolar
6. Normal operation
Select Standard
2015-02-23 19 35
Select Standard
MIJiftiM
YES=<ENT> NO=<ESC>
Figure 6.25 Select grid standard
Press the UP or DOWN key to select the standard (AS4777, VDE41 05, UL-1741, G59/3, CQC,
User-Deffunction, etc.). Press the ENTER key to confirm the setting. Press the ESC key to
cancel changes and return to the previous menu.
Ul1741 is default setting for the U.S. and Canada markets. UL 1741-A is the standard for
inverters with AFCI function.
Selecting the User-Def sub menu will access to the following sub menu (see Figure 6.26).
User-Def
2015-02-23 19 35
OV-G-V1 :
440V
OV-G-V1-T:
1.0s
OV-G-V2:
459V
OV-G-V2-T:
0.2s
UN-G-V1 :
330V
UN-G-V1-T:
1.0s
lll~!iltlll
299V
UN-G-V2-T:
0.2s
OV-G-F1 :
51.0Hz
OV-G-F1-T:
1.0s
OV-G-F2:
52.0Hz
OV-G-F2-T:
0.2s
UN-G-F1 :
48.0Hz
UN-G-F1-T:
1.0s
UN-G-F2:
47.0Hz
UN-G-F2-T:
0.2s
Startup-T:
060s
Restore- T:
060s
SELECT=<ENT> DONE=<ESC>
Figure 6.26 User-Del selections
.47 .
Advertisement
Table of Contents
