Table of Contents
Advertisement
5. Commissioning
~~
CanadianSolar
5.1 Selecting the appropriate grid standard
5.1.1 Verifying grid standard for country of installation
Canadian Solar inverters are used worldwide and feature preset standards for operating on any
grid. Although the grid standard is set at the factory, it is essential the grid standard be verified
for the country of installation before commissioning.
The menu for changing the grid standard or for creating a custom standard is accessible as
described in Section 6.7 and below.
WARNING
Failure to set the correct grid standard could result in improper operation
of the inverter, inverter damage or the inverter to not operate at all.
5.2 Changing the grid standard
5.2.1 Procedure to set the grid standard
.26.
NOTE
This operation is for service technicians only. The inverter is customized
according to the local standard before shipping. There should be no
requirement to set the standard.
NOTE
The "User-Def" function can only be used by the service engineer and
changing the protection level must be allowed by the local utlilty.
1.
From the main screen on the display, select ENTER. There are
4
submenu options,
use the UP/DOWN arrows to highlight ADVANCED SETTINGS. Press enter to select.
Menu
2015-02-23 19 35
Information
-
Figure 5.1
~~
CanadianSolar
5. Commissioning
2. The LCD screen will show that a password is required. The default password is "0010",
press the DOWN key to move cursor, press the UP key to change the highlighted digit.
Password
2015-02-23 19 35
Please Input The Current Password
X
X
X
YES=<ENT> NO=<ESC>
Figure 5.2
3. Use the UP/DOWN keys to highlight the SELECT STANDARD option. Press enter to
select.
Advanced Set.
2015-02-23 19 35
Select Standard
Grid ON/OFF
Power Control
Clear Energy
Restore Settings
-
Figure 5.3
.27.
Advertisement
Table of Contents
