Air Conditioning With Installation - DeLonghi Pinguino F120ECO Use And Maintenance Manual

1
AIR CONDITIONING WITH INSTALLATION
Pinguino can also be semi-permanently
installed
To install, proceed as follows:
• Make a hole in a wall communicating with
the outside or through the pane of a win-
dow. Respect the height and dimensions
given in figure D
in a window
pane
f
-
m-
M
in the wood sill
of a window
=D. Vo:30-*9.
).00 91/ÄOOS:E
IY .0 0% *e A· 4»'
.133?:0*
in the wall: for
optimum results,
insulate the sec-
tion of the wall
with suitable
insulating mate-
rial.
• Fit the flange supplied to the hole.
• Fix the hose to the coupling on the
back of the unit (figure A)
• Attach the end of the hose to the flan-
ge as shown in the figure E.
]
---
MAX 11 5 cm L__J •111•
MIN 50 cm
When the hose is not attached, close the
hole with the bung on the flange bil.
NOTE:
When the unit is installed semi-permanently,
we recommend leaving a door slightly open
(1 cm Is enough) to ensure an adequate
exchange of air.
Position the appliance in the room without
fied air will exhaust directly into the room
.¥
17