Please note when choose "Master" from "Stacking State". It allows user to assign this
!
Switch as Master device in this stack group. Then the rest of the Switches should be slave
NOTE
device.
4.2.9 igmp--IGMP Management Commands
These commands allow configuring the IGMP Parameters. The screen in Figure 4-63 appears.
4.2.9.1 igmp show
This command allows to viewing the current status of IGMP function. The screen in Figure 4-64 ap-
pears.
Figure 4-62: Stack on Screen
Figure 4-63: IGMP Screen
71