Snmp--Snmp Management Commands - Planet SGSW-4802 User Manual

4.2.6.9 stp set bridge <-a MaxAge>
This command allows to setting the maximum Age of STP. The available range is 6-40.

4.2.7 snmp--SNMP Management Commands

These commands allow configuring the SNMP Parameters. The screen in Figure 4-56 appears.
4.2.7.1 snmp [on|off]
This command allows disable (off) or enable (on) the SNMP function. Please refer to Figure 4-57 for
usage and example.
Figure 4-54: STP Forward Delay Screen
Figure 4-55: STP Max Age Screen
Figure 4-56: SNMP Screen
68