Ericsson G30 User Manual page 23

Call waiting service
If you wish to be able to receive a second call while another call is in
progress, you must turn on the call waiting service.
Note: These dialing sequences may vary depending on your
network operator. If these do not work, please consult your net-
work operator or check the user guide provided with your sub-
scription.
To manage call
waiting function ...
All outgoing calls
Note: If instead of hearing beeps you hear a deep tone, this
means that there has been an error in the activation or deactiva-
tion.
Making a Second Call
You can only put one call on hold while you make a second call.
•
To hold the active call: press the R key on your telephone and pro-
ceed to make the second call.
•
To switch between the two calls, press R2.
•
To finish the active call and return to the held call, press R1.
Receiving a Second Call
If the call waiting service is on, you hear a tone in the telephone when
you receive a second call.
•
To ignore the waiting call, take no action.
•
To continue with the ongoing call and reject the waiting call (give a
User Busy indication tone to the waiting call): press R0.
•
To end the ongoing call and answer the waiting call: press R1.
Note: If you hang up the telephone, you will also end the ongoing
call and the telephone will ring again so that you can answer the
waiting call as a normal call.
Fixed Wireless Terminal: G30 & G35
With function ... Dial ...
Activate *43#
Deactivate #43#
Check status *#43#
You will hear ...
1 beep
3 beeps
1 beep if activated
3 beeps if deactivated
23