Table of Contents
Advertisement
Warning: In order to avoid GSM interferences (noise), place the
FWT at least three (3) meters (horizontal) away from electronic
devices, including the telephone equipment connected to the
FWT, or other household electronic devices such as televisions or
radio receivers. The difference in height should be at least 2
meters (vertical). This is not necessary if you use telephone de-
vices that fulfill the Immunity Characteristics settled by the IEC
CISPR-24 standard. In this case, a minimum security distance of
20 cm is recommended.
Connecting the FWT to a PBX
This feature is only available for the FWT G35 model. The G35 FWT is
designed to provide a telephone line (RJ11 connector) that behaves in
the same way as an analog trunk.
Generic requirements
The PBX should meet the following generic requirements for FWT con-
nectivity:
•
The PBX must provide analog trunks.
•
One position of the trunk must be assigned to each FWT.
•
The trunk card must support either Busy Tone Detection (BTD) or
Polarity Reversal Detection on answer and release.
Fixed Wireless Terminal: G30 & G35
17
Advertisement
Table of Contents
