Table of Contents
Advertisement
Now you have prepared the FWT for wall installation. Please, follow the
instructions below for complete wall installation.
Installing the FWT on the Wall
FWT Location
The GSM signal strength available at the FWT location affects the per-
formance of the unit. The stronger the GSM signal, the better the FWT
performance.
Number of Radio LED flashes
0 OFF
1
2
3 - - -
Continuously .....................
Please consider the following recommendations:
•
•
•
•
•
•
12
Note: If the Radio LED is off, you do not have access to the GSM
network at your present location.
Tip: Test several potential locations by moving the FWT while
looking at the Radio LED. Select the location where the Radio
LED is continuous steady, or the location with the highest amount
of flashes.
Note: Moving the FWT as little as 20 cm can affect the GSM
reception quality.
Location Testing
-
-
-
- -
- -
- -
- - -
- - -
Always select an indoor location, preferably close to a window and
as high as possible in the building. Generally, you will experience
better GSM signal strength in these places.
Always ensure that the distance between the FWT location and the
user or other people is greater than 20cm
Do not install the FWT in a wet or damp location.
Do not install the FWT in an outdoor location.
Do not install the FWT on walls or in rooms that contain large
amounts of metal, steel or wiring.
Do not expose the FWT to extreme temperatures (near radiators,
cooling vents, etc).
Fixed Wireless Terminal: G30 & G35
Location status
Unacceptable
Acceptable
Good
Very Good
Excellent
Advertisement
Table of Contents
