Table of Contents
Advertisement
Shooting
Learn about a variety of shooting modes for stills and movies.
Auto Mode
●
For fully automatic selection of the optimal settings for specific scenes,
simply let the camera determine the subject and shooting conditions.
●
Frames are displayed around faces and subjects that have been
detected, indicating that they are in focus.
Scene Intelligent Auto: Stills
●
An icon for the scene determined by the camera is displayed in the
upper left when you aim the camera at a subject in [
●
When using a zoom lens, you can resize subjects by turning the zoom
ring on the lens.
●
The camera beeps twice after focusing when you press the shutter
button halfway, and AF frames are displayed to indicate image areas
in focus.
●
If [Raise the flash] is displayed, move the
It will fire when shooting. If you prefer not to use the flash, push it
down with your finger, into the camera.
●
In low-light conditions when you have raised the flash, it fires
automatically as the camera shoots.
●
After you shoot, the image is displayed for about two seconds. Even
while the shot is displayed, you can take another shot by pressing the
shutter button again.
Scene Intelligent Auto: Movies
●
Pressing the movie button starts recording, and [
with the elapsed time.
●
Black bars displayed on the top and bottom edges of the screen
indicate image areas not recorded.
Wireless Features/Accessories
Wireless Features
Accessories
Learning About the Camera
Setup and Basics
Shooting
] mode.
Playback
Settings
Troubleshooting
switch to raise the flash.
Errors and Warnings
Appendix
Index
Rec] is displayed
53
- Quick Links:
- Available Wireless Features
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
