Table of Contents
Advertisement
4
Send an image.
●
Choose an image to send, press the /
buttons to choose [Send this image], and
then press the
button.
●
[Transfer completed] is displayed after
the image is sent, and the image transfer
screen is displayed again.
●
To end the connection, press the
button, press the / buttons on the
confirmation screen to choose [OK], and
then press the
button.
●
Connections require that a memory card be in the camera.
●
Once you have connected to devices via the Wi-Fi menu, recent
destinations will be listed first when you access the menu. You
can easily connect again by pressing the
/
the device name and then pressing the
button. To add a new
device, display the device selection screen by pressing the
buttons, and then configure the setting.
●
If you prefer not to display recent target devices, choose MENU >
[ 4] tab > [Wireless settings] > [Wi-Fi Settings] > [Target History]
> [Off].
●
You can also send multiple images at once and change the image
size before sending ( = 23).
Image Sending Options
You can choose multiple images to send at once and change the image
recording pixel setting (size) before sending. Some Web services also
enable you to annotate the images you send.
Sending Multiple Images
buttons to choose
/
Choosing Images Individually
1
Choose [Select and send].
●
On the image transfer screen, press the
/ buttons to choose [Select and send],
and then press the
button.
2
Choose a selection method.
●
Press the
/
buttons to choose a
selection method.
1
Choose [Select].
●
Following step 2 in "Sending Multiple
Images" ( = 23), choose [Select] and
press the
button.
Wireless Features/Accessories
Wireless Features
Accessories
Learning About the Camera
Setup and Basics
Shooting
Playback
Settings
Troubleshooting
Errors and Warnings
Appendix
Index
23
- Quick Links:
- Available Wireless Features
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
