Table of Contents
Advertisement
For quick and easy picture-taking, this
section describes the Command Dial's
Basic Zone modes: <□>, <?*>, <*4>,
<tti>, <^>, and <B>. These modes
set all the camera settings automatically.
All you do is point the camera and press
the shutter button.
Also, these modes override the
camera's
<0>. and AF Mode
dials, film advance mode lever (except
<Ci)i>), and buttons (except <func.>,
<Qn>, and the shutter button). This is
to prevent spoiled shots caused by
accidental operation of camera controls.
Fully Automatic Shooting
• In the Basic Zone modes except
<Sfc> and <<*.>, the built-in flash
pops up and fires automatically
under low-light or backlit conditions.
(-»page 74)
• The settings automatically set by
the Basic Zone modes are shown in
the "Feature Availability Table" on
page 92.
Advertisement
Table of Contents
