Canon EOS M100 Help Manual page 15

6
Establish the connection.
● On the access point, hold down the WPS
connection button for a few seconds.
● On the camera, press the
to the next step.
7
Send images.
● Follow steps 6 – 9 in "Connecting to
a Smartphone via the Wi-Fi Menu"
( = 12) to choose the smartphone,
adjust the privacy setting, and send the
images.
● The PIN code displayed when you choose [WPS (PIN mode)]
in step 5 is to be set in the access point. Choose a device in the
[Select a Device] screen. For further details, refer to the user
manual included with your access point.
Connecting to Listed Access Points
button to go
1
View the listed access points.
● View the listed networks (access points)
as described in steps 1 – 3 of "Using
WPS-Compatible Access Points"
( = 14).
2
Choose an access point.
● Press the / buttons to choose a
network (access point), and then press
the button.
3
Enter the access point password.
● Press the button to access the
keyboard, and then enter the password.
● Press the / buttons to choose [Next],
and then press the button.
4
Choose [Auto].
● Press the / buttons to choose [Auto],
and then press the button.
5
Send images.
● Follow steps 6 – 9 in "Connecting to
a Smartphone via the Wi-Fi Menu"
( = 12) to choose the smartphone,
adjust the privacy setting, and send the
images.
Wireless Features/Accessories
Wireless Features
Accessories
Learning About the Camera
Setup and Basics
Shooting
Playback
Settings
Troubleshooting
Errors and Warnings
Appendix
Index
15