Playback Using Touch Operations - Canon EOS M100 Help Manual

Overexposure Warning (for Image Highlights)
● Information displays 2 – 8 can help you avoid washed-out highlights,
which blink as a warning.
Brightness Histogram
● Information displays 2 – 8 include a graph on the top called a
brightness histogram, which shows the distribution of brightness in
images. The horizontal axis represents the degree of brightness, and
the vertical axis, how much of the image is at each level of brightness.
Viewing this histogram enables you to check exposure.
RGB Histogram
● Information display 3 includes an RGB histogram, showing the
distribution of reds, greens, and blues in images. The horizontal axis
represents R, G, or B brightness, and the vertical axis, how much of
the image is at that level of brightness. Viewing this histogram enables
you to check image color characteristics.
● The histogram can also be accessed while shooting.

Playback Using Touch Operations

● To enter Scroll Display mode, quickly drag repeatedly. The following
operations are available on the Scroll Display playback screen.
- Drag left or right across the screen to choose an image.
- Touching the central image will restore single-image display.
- Quickly drag up or down to browse images grouped by shooting
date.
● Touch [ ] during movie playback to display the volume panel, and
then touch [ ]/[ ] to adjust the volume.
● Touch the screen during movie playback to display the movie control
panel. To switch frames, touch the scrollbar or drag left or right.
To return to the screen shown before playback, touch [
● During index display, drag up or down to scroll through images.
● Touch an image during index display to select it, and touch it again to
enter single-image display.
● Quickly touch the screen twice to magnify the image. To return to
single-image display from magnified display, quickly touch the screen
twice.
● Drag to move the display position during magnified display.
Magnifying Images
● Each time you turn the
to about 10x.
● To reduce image display, turn the
● The approximate position of the displayed area is shown for reference
during magnified display.
● While [
the button. To switch to other images while zoomed, press the /
buttons. Press the
● You can return to single-image display from magnified display by
pressing the
Viewing Slideshows
● After you start playback and [Loading image] is displayed, the
slideshow starts in a few seconds.
● Press the
● The camera's power-saving functions are deactivated during
slideshows.
● To pause or resume slideshows, press the
● You can switch to other images during playback by pressing the /
buttons. For fast-forward or fast-rewind, hold the / buttons down.
● On the slideshow start screen, you can choose [Set up] to configure
slideshow repetition, display time per image, and the transition
between images.
].
● During a slideshow, you can also stop playback by touching the
screen.
dial clockwise, images are magnified, up
dial counterclockwise.
] is displayed, you can switch to [ ] by pressing
button again to return to the original display.
button.
button to stop the slideshow.
button.
Wireless Features/Accessories
Wireless Features
Accessories
Learning About the Camera
Setup and Basics
Shooting
Playback
Settings
Troubleshooting
Errors and Warnings
Appendix
Index
79