Other Settings - Canon EOS M100 Help Manual

● [1st curtain] is used whenever the shutter speed is 1/100 or faster,
even if you select [2nd curtain].
Changing the Flash Metering Mode
● When using [Average], adjust flash exposure compensation to suit the
shooting conditions.

Other Settings

Changing the IS Mode Settings
● The following [IS Mode] items are available.
Corrects camera movement or camera shake using
Continuous
built-in image stabilization performed by the lens.
Off Deactivates image stabilization.
● If image stabilization cannot prevent camera shake, mount the camera
on a tripod or take other measures to hold it still. Additionally, you
should set [IS Mode] to [Off] when using a tripod or other means to
secure the camera.
● [IS Mode] is not displayed for lenses other than EF-M lenses. Use the
image stabilization switch on the lens instead.
● Lenses with built-in image stabilization are named with "IS." IS stands
for Image Stabilizer.
Correcting Camera Shake when Recording Movies
● Even more effective correction is possible by using a lens that
supports Combination IS, which combines lens image stabilization
with in-camera Digital IS. For details on lenses compatible with
Combination IS, check the Canon website.
● The following [ Digital IS] items are available.
(When using a
Enable
lens supporting
Combination IS)
(When using a
Enhanced
lens supporting
Combination IS)
Disable
● Digital IS for movies is not available when a lens without built-in image
stabilization is attached.
● Try taking some test shots first to check the effect with the lens you are
using.
● [Enhanced] is only available in [ ] and [
Correcting Lens Aberrations
● Noise may occur around the edges of images shot under some
conditions if you set [Peripheral illumin.] to [Enable].
● The effect of peripheral illumination correction is slightly less than that
of maximum correction in Digital Photo Professional.
● The higher the ISO speed, the lower the amount of peripheral
illumination correction will be.
● When setting [Diffraction] to [Enable], keep the following points in
mind.
- When correcting lens aberration, this feature may also make noise
more noticeable, under some shooting conditions.
- The higher the ISO speed, the lower the amount of correction will be.
- Correction is not applied to movies.
● [Diffraction] corrects loss of sharpness not only from diffraction but
also from the low-pass filter and other factors. Thus, correction is also
effective for exposures with the aperture wide open.
Wireless Features/Accessories
Wireless Features
Corrects camera shake
Accessories
when recording movies. The
image display area narrows
and subjects are slightly
Learning About the Camera
enlarged.
Corrects strong camera
Setup and Basics
shake when recording
movies. Subjects are further
Shooting
enlarged.
–
Playback
Settings
Troubleshooting
] modes.
Errors and Warnings
Appendix
Index
68