Sending Images Automatically (Image Sync); Clearing Registered Destinations - Canon PowerShot G1X Mark II User Manual

Clearing Registered Destinations

Press the <n> button, and then
choose [Mobile Device Connect Button]
on the [3] tab
Press the <q><r> buttons or turn the
<7> dial to choose [OK], and then press
the <m> button.
After a confirmation message is
displayed, press the <m> button.
• Registered destinations are also cleared when you reset Wi-Fi settings
(= 168).
Images on the memory card that have not been transferred already can be
sent to a computer or Web services via CANON iMAGE GATEWAY.
(= 26).
Note that images cannot be sent only to Web services.
Install and configure the software on the destination computer. Install and configure the software on the destination computer. Install and configure the software on the destination computer.
Sending Images Automatically (Image
Sync)
Initial Preparations Initial Preparations Initial Preparations
1
Install the software.
Install the software on a computer
connected to the Internet
2
Register the camera.
Windows: In the taskbar, right-click [
and then click [Add new camera].
Mac OS: In the menu bar, click [
then click [Add new camera].
A list of cameras linked to CANON
iMAGE GATEWAY
Choose the camera from which images
are to be sent.
Once the camera is registered and the
computer is ready to receive images, the
icon changes to [
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid
Auto Mode
Other Shooting
Modes
P Mode
Tv, Av, M, C1, and
C2 Mode
(= 146).
Playback Mode
],
Wi-Fi Functions
Setting Menu
], and
Accessories
(= 142) is displayed.
Appendix
Index
].
163