3.3
DIP Switch Setting in Video LAN Converter
When two video LAN converters are installed, you should set the DIP switch (S1-1) in
the No.2 video LAN converter. It is not required to change the DIP switch setting in the
No.1 video LAN converter.
Inside view of the video LAN converter
Video LAN Converter No.
1
OFF (Default setting)
2
ON
3. SETTING UP THE EQUIPMENT
DIP switch S1
1
ON
OFF
DIP switch S1
S1-1
OFF (Default setting)
8
S1-2 to S1-8
3-3