Safety Instructions - Furuno VR-7000 Installation Manual

SAFETY INSTRUCTIONS

The installer of the equipment must read the safety instructions before attempting to
install the equipment.
DANGER
WARNING
CAUTION
Warning, Caution
WARNING WARNING
Do not open the equipment unless
you are well familiar with electrical
circuits.
Only qualified personnel should work
inside the equipment.
Turn off the power at the switchboard
before beginning the installation.
Fire or electrical shock can result if the
power is left on.
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or damage the
equipment.
Indicates a potentially hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
can result in minor or moderate injury.
Prohibitive Action
Mandatory Action
WARNING
Use only the specified power and
signal cable.
Fire or damage to the equipment
can result if a different cable is used.
Do not install the equipment
where they may get wet from rain
or water splash, or in a dusty
environment.
Water in the units can result in fire,
electrical shock, or damage the
equipment.
Ground the equipment to prevent
electrical shock and mutual
interference.
i