Power Supply - Furuno VR-7000 Installation Manual

2.1.2

Power supply

Connect the AC power 100-230 VAC to J1 of the DCU with the DPYC-1.5 cable. If AC
emergency source of electrical power is provided, connect it to the AC line.
DCU
2.1.3 Ground connection
To ground the DCU, use the crimp-on lug preattached to the DCU (see figure below).
Attach the crimp-on lug to the ground wire (IV-2sq.), then connect the lug as shown
below.
AC
Ship equipped with emergency AC power
Main Generator
Emergency Generator
Attach the crimp-on lug to the
ground wire, then fix here.
2. WIRING
2-5