Table of Contents
Advertisement
Figure 59. RFID tag removal
Step 1.
If the RFID tag is still attached to its hinge, open the RFID tag.
Important: Use care when removing the RFID tag to avoid damaging the ID label plate.
Step 2.
Use pliers to carefully grip the RFID hinge and gently pull and twist the base of the RFID tag from
the ID label plate on the front panel of the compute node. Hold the ID label plate in place on the
compute node front panel while removing the RFID tag.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the RFID tag
Use this information to install the RFID tag on the front panel.
76
ThinkSystem SN550 Compute Node Maintenance Manual
Advertisement
Table of Contents
