Q Vlan Setting Example - Planet FGSW-1828PS User Manual

802.1Q VLAN Setting example:

Two separate 8 02.1Q VLAN scenario
1. Shows ho w th e Web Smart PoE Switch. Handles Untagged and Tagged traffic from two 802.1Q VLAN groups.
2. Each VLAN is olate network
VLAN Group
VLAN Group 1
VLAN Group 2
VLAN Group 3
The scenario described as follow:
Untagged packet entering VLAN 2
While [PC-1] transmit an untagged packet enters Port-1, the Web Smart PoE Switch. Will tag it with a VLAN
1.
Tag=2. [PC-2] and [PC-3] will received the packet through Port-2 and Port-3.
[PC-4], [PC-5] and [PC-6] received no packet.
2.
While the packet leaves Port-2, it will be stripped away it tag becoming an untagged packet.
3.
While the pack
4.
Tagged packet entering VLAN 2
While [PC-3] transmit a tagged packet with VLAN Tag=2 enters Port-3
5.
pac ket through Port-1 and Port-2.
While the pa cket leaves Port-1 and Port-2, it will be stripped away it tag becoming an untagge
6.
Untagged packet entering VLAN 3
While [PC-4]
7.
[PC-6] will r eceived the packet through Port-5 and Port-6.
Wh ile the pa cket leaves Port-5, it will be stripped away it tag becoming an untagged pa
8.
While the p cket leaves Port-6, it will keep as a tagged pac a
9.
At this example, VLAN Group 1 just set as default VLAN, but only focus on VLAN 2, VLAN 3 traf
Notice:
traffic, only the same VLAN member port can receive traffic from each other.
Figure 4-30 two separate 802.1Q VLAN diagram
VID
1
2
3
Table 4-13 VLAN and Port Configuration
et leaves Port-3, it will keep as a tagged packet with VLAN Tag=2.
transmit an untagged packet enters Port-4, the switch will tag it with a VLAN Tag=3. [PC-5] an
Untagged Members
Port-7~Port-18
Port-1,Port-2
Port-4,Port-5
ket with VLAN Tag=3.
Tagged Members
N/A
Port-3
Port-6
, [PC-1] and [PC-2] will received the
d packet.
cket.
d
fic flow.
- 38 -